Topcon BC-L1 Survey Total Station Li-lon Battery Charger for BT-L3/BT-77Q Batteries

Topcon BC-L1 Survey Total Station Li-lon Battery Charger for BT-L3/BT-77Q Batteries

Model: BC-L1

Specifications:

Introduction:

1. Charger for Topcon Total Station Battery BT-L3 and BT-77Q

2. Li-lon Battery Charger

3. EU/US Plug

4. Input: 220V 50Hz 0.1A

5. Output: 9V 1.2A

Features:

1. Charges a single battery at a time.

2. Can be used for Topcon and Sokkia Batteries

3. The shell of the charger is made of ABS material, which is resistant to high temperature and abrasion.

4. Built-in charging automatic protection chip.

Battery Charger

A battery charger, or recharger, is a device used to put energy into a secondary cell or rechargeable battery by forcing an electric current through it. The charging protocol depends on the size and type of the battery being charged. Some battery types have high tolerance for overcharging and can be recharged by connection to a constant voltage source or a constant current source, depending on battery type. Simple chargers of this type must be manually disconnected at the end of the charge cycle, and some battery types absolutely require, or may use a timer, to cut off charging current at some fixed time, approximately when charging is complete. Other battery types cannot withstand over-charging, being damaged, over heating or even exploding. The charger may have temperature or voltage sensing circuits and a microprocessor controller to safely adjust the charging current and voltage, determine the state of charge, and cut off at the end of charge.